2010 Cadillac Truck SRX AWD V6-3.0L Page 651

2010 Cadillac Truck SRX AWD V6-3.0L Page 651

Component Connector End Views (See: Diagrams/Connector Views/Connector End Views By Name)

Description and Operation

Power Windows Description and Operation (See: Windows and Glass/Windows/Description and Operation/Power Windows)

Electrical Information Reference

* Circuit Testing (See: Testing and Inspection/Component Tests and General Diagnostics/General Electrical Diagnostic Procedures/Circuit

Testing/Circuit Testing)

* Connector Repairs (See: Testing and Inspection/Component Tests and General Diagnostics/General Electrical Diagnostic

Procedures/Connector Repairs/Connector Repairs)

* Testing for Intermittent Conditions and Poor Connections (See: Testing and Inspection/Component Tests and General Diagnostics/General

Electrical Diagnostic Procedures/Circuit Testing/Testing for Intermittent Conditions and Poor Connections)

* Wiring Repairs (See: Testing and Inspection/Component Tests and General Diagnostics/General Electrical Diagnostic Procedures/Wiring

Repairs/Wiring Repairs)

Scan Tool Reference

Control Module References (See: Testing and Inspection/Programming and Relearning) for scan tool information

Circuit/System Verification

B3205 00, B3205 39, B3205 42, B3210 00, B3210 39, B3210 42, B3215 39, B3220 39

1. Ignition ON, command the M74 window motor UP and DOWN with a scan tool. The M74 window motor should perform the UP and

DOWN functions.

Note: If the window performs the UP and DOWN functions, clear the DTC

2. Replace the M74 window motor with a M74 window motor compatible for that specific make and model vehicle.

Circuit/System Testing

B3205 4B, B3210 4B

1. Ignition ON, starting with the window completely UP, press and hold the appropriate power window switch until the window is fully open

and continue holding the switch down for approximately 5 seconds after the window is completely open.

2. Pull the power window switch up until the window is fully closed and continue holding the switch up for approximately 5 seconds after the

window is completely closed.

3. Command the window to express UP and express DOWN by pressing the window switch past the first detent and releasing and then pulling

the window switch past the first detent and releasing. The window should perform the express UP and express DOWN functions.

瀚慖f the M74 window motor does not perform as specified and the DTC resets, replace the M74 window motor.

Repair Instructions

Perform the Diagnostic Repair Verification (See: Verification Tests) after completing the diagnostic procedure.

* Front Side Door Window Regulator Replacement (See: Windows and Glass/Windows/Service and Repair/Front Side Door Window

Regulator Replacement)

* Rear Side Door Window Regulator Motor Replacement (See: Windows and Glass/Windows/Service and Repair/Rear Side Door Window

Regulator Motor Replacement)

B3215

DTC B3205, B3210, B3215, or B3220

Diagnostic Instructions

* Perform the Diagnostic System Check - Vehicle (See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Diagnostic System

Check - Vehicle) prior to using this diagnostic procedure.

* Review Strategy Based Diagnosis (See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Strategy Based Diagnosis) for an

overview of the diagnostic approach.

* Diagnostic Procedure Instructions (See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Diagnostic Procedure

Instructions) provides an overview of each diagnostic category.

DTC Descriptors

DTC B3205 00

- Driver Window Motor Circuit