2010 Cadillac Truck SRX AWD V6-3.0L Page 497

* Perform the Diagnostic System Check - Vehicle (See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Diagnostic System

Check - Vehicle) prior to using this diagnostic procedure.

* Review Strategy Based Diagnosis (See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Strategy Based Diagnosis) for an

overview of the diagnostic approach.

* Diagnostic Procedure Instructions (See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Diagnostic Procedure

Instructions) provides an overview of each diagnostic category.

DTC Descriptors

DTC B1735 02

- Driver Seat Front Up Switch Circuit Short to Ground

DTC B1740 02

- Driver Seat Front Down Switch Circuit Short to Ground

DTC B1745 02

- Driver Seat Rear Up Switch Circuit Short to Ground

DTC B1750 02

- Driver Seat Rear Down Switch Circuit Short to Ground

DTC B1755 02

- Driver Seat Assembly Forward Switch Circuit Short to Ground

DTC B1760 02

- Driver Seat Assembly Rearward Switch Circuit Short to Ground

DTC B1815 02

- Driver Seat Recline Forward Switch Circuit Short to Ground

DTC B1820 02

- Driver Seat Recline Rearward Switch Circuit Short to Ground

Diagnostic Fault Information

Circuit/System Description

The seat memory control module supplies a reference voltage to each signal circuit of the driver seat adjuster switch. When the power seat switches

are pressed, the appropriate signal circuit from the seat memory control module is pulled low through the switch contacts indicating the power seat

command. The seat memory control module then commands the driver seat to move in response to the switch signals.

Conditions for Running the DTC

* DTC B1325 must not be present.

* Module battery voltage must be between 9 - 16 V.

Conditions for Setting the DTC

FORD