2010 Cadillac Truck SRX AWD V6-3.0L Page 620

2010 Cadillac Truck SRX AWD V6-3.0L Page 620



Control Module References (See: Testing and Inspection/Programming and Relearning)for scan tool information



Circuit/System Verification



Verify none of the following DTCs are set:



* DTC B3109



* DTC B3110



* DTC B3111



* DTC B3112



* DTC B3113



If any of the DTCs are set, replace the battery in the appropriate keyless entry transmitter. Operate the transmitter 3 consecutive times. If the DTC



resets, replace the keyless entry transmitter.



Repair Instructions



Perform the Diagnostic Repair Verification (See: Verification Tests) after completing the diagnostic procedure.



Replacing Keys (See: Accessories and Optional Equipment/Antitheft and Alarm Systems/Service and Repair/Replacing Keys)



B3113



DTC B3109-B3113



Diagnostic Instructions



* Perform the Diagnostic System Check - Vehicle (See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Diagnostic System



Check - Vehicle) prior to using this diagnostic procedure.



* Review Strategy Based Diagnosis (See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Strategy Based Diagnosis) for an



overview of the diagnostic approach.



* Diagnostic Procedure Instructions (See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Diagnostic Procedure



Instructions)provides an overview of each diagnostic category.



DTC Descriptors



DTC B3109 00



- Keyless Entry Transmitter 1 Battery



DTC B3110 00



- Keyless Entry Transmitter 2 Battery



DTC B3111 00



- Keyless Entry Transmitter 3 Battery



DTC B3112 00



- Keyless Entry Transmitter 4 Battery



DTC B3113 00



- Keyless Entry Transmitter 5 Battery



Circuit/System Description



With each press of a keyless entry transmitter button, a message containing the current battery state of the transmitter is sent to the remote control



door lock receiver, along with the commanded keyless entry function. The remote control door lock receiver sends this to the body control module



(BCM) to perform the requested function.



Conditions for Running the DTC



A keyless transmitter button is pressed.



Conditions for Setting the DTC



3 consecutive low battery signals are received from the same transmitter.



Action Taken When the DTC Sets



The keyless entry system is inoperative.

Comments

Popular posts from this blog

2010 Cadillac Truck SRX AWD V6-3.0L Page 968

With Respect To The C63 AMG

Disclaimer2020 Lincoln Truck MKT FWD V6-3.7L Technical Service Bulletin # 10-6-3 Date: 100412